Warning: Last items in stock!
1000 Item items
Cheap 0.4mm nozzle, Buy Quality 3d hot end directly from China 1.75mm hot end Suppliers: DIY Hot End for RepRap MK8 3D Printer 1.75mm Filament + 0.4mm Nozzle + 12V 40W Heater + NTC 3950 Thermistor Hotend
Tags: 0.4mm nozzle, 3d hot end, 1.75mm hot end, Cheap 0.4mm nozzle, High Quality 3d hot end, China 1.75mm hot end Suppliers
DIY Hot End for RepRap MK8 3D Printer 1.75mm Filament + 0.4mm Nozzle + 12V 40W Heater + NTC 3950 Thermistor Hotend
Product features Stainless PTFE lined barrel for trouble free, low friction print Pre-wired NTC3950 thermistor Clamping screw and washer for easy thermistor mounting Use it with heatsink or cooled metal base Plenty of MK8 clone nozzles compatible with this hotend - nozzle replacement is cheap and easy
12V version with 40W heater. DIY hotend requires heat sink to operate properly - metal base, aluminum block, or any other type of cooling device.
Assembly of this device is straight forward. Please consult with supplied drawings and pictures for visual clue. Thermistor mounted with clamping screw and washer similar to E3D V6.
Hotend features: 30mm long stainless PTFE lined barrel, for low friction, trouble free print. Nozzle is based on MK8 makerbot nozzle geometry and can be exchanged or replaced with many different types of nozzles on the market. This will give you good selection of nozzle orifice diameters. Low profile: only about 43 mm high. NTC 3950 100K pre-wired thermistor.
NTC 3950 Thermistor parameters: Small Size: 1.25mmx2.0mm glass bead High accuracy: 1% Resistance value at 25C=100K Wiring insulation: high temperature teflon/PTFE Wiring length: 1 meter
1pc x MK8 Nozzle 0.4mm extrusion diameter.
1pc x Stainless PTFE lined barrel.
1pc x Aluminum heater block
1pc x 12V 40W Cartridge Heater.
1pc x NTC 3950 Pre-wired thermistor
|Package Weight||0.15kg (0.33lb.)|
|Package Size||10cm x 10cm x 5cm (3.94in x 3.94in x 1.97in)|