Warning: Last items in stock!
1000 Item items
Cheap panel mesh, Buy Quality switch gigabit 8 ports directly from China switch tube Suppliers: AC 220V 2 CH Relay Wireless Remote Switch Contact NO COM NC RF Wireless Switch Home LED Lamp Light Remote Lighting Wall Panel
Tags: panel mesh, switch gigabit 8 ports, switch tube, Cheap panel mesh, High Quality switch gigabit 8 ports, China switch tube Suppliers
1.Working Voltage:AC220V ±10%
2.Current: Standby≤10mA,Working ≤128mA
3.Working Temperature: -10\'C—+60\'C
4.Receiver Frequency: 315MHz/433MHZ Optional by leaving us massage
5.Receiving Sensitivity: -105dB
6.Output State: Switching Value
7.Max Load: 10A Relay, Resistive load≤8A,Inductive load≤3A
8.Receiver Board Size: 70×50×19mm
9.Case Size: 90×65×35mm
Learning Code: Add transmitter by the Learning Button on the receiver
It is adjusted by the Jumper on the Receiver Board, (before you change it need turn OFF the power .when you have been change it turn ON the power again, or the State will not change)
Momentary------------Jumper on “1&2”
Toggle---------------Jumper on “3&4”
Latched---------------Take away the Jumper or put the Jumper on any one Pin.
Momentary------------Press the Transmitter button A, the receiver relay A is ON, release button A. the receiver relay A is OFF, the same as B Button
Toggle---------------Press transmitter button A for 1 time , the receiver relay A is ON, press button A again, the receiver relay A is OFF, the same as B Button
Press transmitter button A , the receiver relay A is ON, the relay B is OFF.
Press transmitter button B, the receiver relay B is ON, the relay A OFF.
Keeping press the Learning Button on the Receiver, the LED indicator flash fast and then release, it mean clear successfully.
Press the Learning Button, the LED indicator ON ,then press the transmitter Button A, the LED indicator flash fast and then press the Transmi
|Package Weight||0.3kg (0.66lb.)|
|Package Size||5cm x 10cm x 10cm (1.97in x 3.94in x 3.94in)|
|Brand Name||CENTURY AOKE|
|Switch Type||Remote Control|